I recently picked up the Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) from Security Sensor Spacers, and after putting it to work securing my Houston property, I have solid observations to share about this door and window sensor accessory. At $17 for the pair, this is a practical solution to a real problem I encountered with my Ring alarm system.
Here is the situation I faced. My Ring sensors weren’t sitting flush against certain door frames around my house, particularly on older frames that had uneven surfaces and gaps. The magnet connection wasn’t consistent, which meant the system occasionally failed to register when doors opened. I needed a fix that did not involve replacing frames or hiring contractors. The Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) offered exactly what I needed.
Why the Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) Stands Out
The 3M adhesive backing works as advertised. I applied these risers to two of my problem entry points, and they held solid. The one-inch height was precisely what I needed to bridge the gap between my uneven door frame and the sensor magnet. Installation took minutes. No tools required, no drilling, no mess. You clean the surface, peel the adhesive backing, and press it into place. Within 24 hours, the adhesive had fully set.
After installation, my Ring sensors aligned perfectly with the riser-mounted magnets. The connection became reliable. My system now registers every door opening without fail. I have also added these risers to recommended products for anyone dealing with similar installation challenges. The Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) is straightforward engineering solving a straightforward problem.
The build quality feels solid. The plastic construction is durable enough for residential use, and the adhesive is strong enough that I do not expect these to shift or loosen over time. I tested the bond strength myself before fully committing to the installation, and it held without question.
One thing to note is that this product requires you to already own Ring sensors and magnets. The risers themselves are spacers only. If you are building a new system from scratch, budget for the sensors separately. But if you already have Ring gear and just need to make it work in difficult spaces, this is your answer.
Would I Buy the Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) Again
Absolutely. The Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) solved a specific problem without unnecessary complexity or expense. For someone running a home security system, this is a legitimate tool that belongs in your arsenal if you have uneven surfaces or frame gaps. The two-pack gives you flexibility to address multiple problem areas, and I used both units immediately.
Security is not something I take lightly, having spent years in the military where attention to detail meant everything. This product delivers on its promise to mount easily to doorways, windows, and entryways while maintaining sensor reliability. I would recommend this to anyone struggling with sensor alignment issues in their Ring system. Get the Ring Alarm Magnet Riser | 2 Pack Set with 3M Adhesive – Easy Mount to Any Doorway, Window, and Entryway | Sensor/Magnet Not Included (1 inch) if you need reliable gap spacing for your Ring sensors.